{"title":"FPV \u0026 Drone RF","description":null,"products":[{"product_id":"fpv-small-wifi-antenna-2-4ghz-wireless-module-omni-directional-thumb-antenna-mmdvm-network-router-antenna-rp-sma-male-tx-rx-mini-rhcp-racing-drone-antenna-for-multicopter-wifi-usb-adapter-pack-of-2","title":"FPV Small WiFi Antenna 2.4GHz Wireless Module Omni Directional Thumb Antenna mmdvm Network Router Antenna RP SMA Male TX RX Mini RHCP Racing Drone Antenna for Multicopter WiFi USB Adapter Pack of 2","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\" data-mce-fragment=\"1\"\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eThis Mini WiFi Bluetooth antenna could be used on drone transmitter\u0026amp;receiver and PC motherboard;The 2.4GHz small WiFi antenna will assist your network devices get a stronger signal reception and a stable connection, no dropouts when use them\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eCompatibility with wireless standards \u0026amp; applications;Vertically polarized and suitable for many of today’s machine to machine and communication applications such as telemetry, remote monitoring and mesh networking applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eConector Type : RP SMA Male;Antenna gain :2 dBi;impedance matching to 50 Ohm gear;3CM long\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003ePolarization Omnidirectional,Maxlmum input Power:50W;Application:wireless network router, PCI PCIe network card,notebook PC computer external USB adapter, WLAN AP \u0026amp; Hotspot wireless range extender, FPV camera, etc\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003ePackage Content : 2 x 2.4GHz Short WiFi Antenna\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":40095220138019,"sku":"OL-3464-2X","price":9.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-3464_6.jpg?v=1691401023"},{"product_id":"5-pieces-antenna-wifi-pigtail-cable-mmcx-male-right-angle-to-rp-sma-female-fpv-antenna-extension-cable","title":"5 Pieces Antenna WiFi Pigtail Cable MMCX Male Right Angle to RP SMA Female FPV Antenna Extension Cable","description":"\u003cul data-spm-anchor-id=\"a2g0o.detail.1000023.i0.62c8yMXOyMXOKm\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWIFI Antenna Extension Pigtail Jumper Cable RP SMA to MMCX\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eImpedance: 50Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLength: 70mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFor the transfer of VT5804 , and the Flytower\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003ePackage Content :\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e 5 x MMCX Male Right Angle to RP SMA Female Cable\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":40095644287011,"sku":"OL-3849-5X","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-3849_2.jpg?v=1691484847"},{"product_id":"u-fl-ipex-ipx-pigtail-cable-antenna-coax-low-loss-cable-mini-pci-u-fl-ipex-ipx-to-sma-female-antenna-wifi-extension-cable-for-wireless-routers-mini-pcie-cards-network-extension-15cm-pack-of-5","title":"U.fl Pigtail Cable Antenna Coax Low Loss Cable Mini PCI U.FL to SMA Female Antenna WiFi Extension Cable for Wireless Routers, Mini PCIe Cards, Network Extension 15cm Pack of 100","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\" data-mce-fragment=\"1\"\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eWiFi Antenna Cable for Router Wireless Cards; This antenna cable is compliant for all types of wireless antennas, including wireless\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eRF U.FL Cables Have Bulkhead Gold Plated Connector; for Mini PCI-e Wireless WLAN Wifi Card:Ar9462 Ar5b22 Wb222 Intel Network 6235AN AC 3160 AC31603160HMW AR5418 AR5008 AR5BXB72 7260 7260HMW\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eGender: SMA Jack,female pin\/Ufl,15cm U.fl  to SMA Female Antenna WiFi Wireless WAN 1.13 Pigtail Cable,1.13mm mini-coaxial cable: This is a very thin and flexible cable, with a black jacket. When connecting U.FL connector to a jack on a miniPCI card or board, often the tight space requires the use of 1.13mm cable, because it is very thin and flexible\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eWide application: Mobile phones, Antenna, WLAN, Mini PCI, Bluetooth, PDA, GPS, drone, transmitter, electronic measuring instrument, Netgear EX6150,GPS module,wifi camera,\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003ePackage Content : 100 x SMA to U.fl connectors Cable\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONELINKMORE","offers":[{"title":"2.5 CM","offer_id":40100587044899,"sku":"OL-3456-100X","price":52.0,"currency_code":"USD","in_stock":true},{"title":"5 CM","offer_id":40100587077667,"sku":"OL-3346-100X","price":52.0,"currency_code":"USD","in_stock":true},{"title":"10 CM","offer_id":40100587110435,"sku":"OL0080-100X","price":52.0,"currency_code":"USD","in_stock":true},{"title":"15 CM","offer_id":40100587143203,"sku":"OL0865-100X","price":52.0,"currency_code":"USD","in_stock":true},{"title":"25 CM","offer_id":40100587175971,"sku":"OL-3347-100X","price":53.0,"currency_code":"USD","in_stock":true},{"title":"30 CM","offer_id":40100587208739,"sku":"OL-3348-100X","price":56.0,"currency_code":"USD","in_stock":true},{"title":"40 CM","offer_id":40100587241507,"sku":"OL-3349-100X","price":59.0,"currency_code":"USD","in_stock":true},{"title":"50 CM","offer_id":40100587274275,"sku":"OL-3350-100X","price":62.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL0865_11111.jpg?v=1691485247"},{"product_id":"onelinkmore-pigtail-antenna-wifi-cable-m-2-ngff-u-fl-mhf4-ipex4-ipx4-female-to-mhf4-male-cable-10cm-rf-pigtail-cable-0-81mm-low-loss-extension-cable-pack-of-2","title":"onelinkmore Pigtail Antenna WiFi Cable M.2 NGFF U.FL MHF4 Female to MHF4 Male Cable 10cm RF Pigtail Cable 0.81MM Low Loss Extension Cable Pack of 2","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\" data-mce-fragment=\"1\"\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eMHF4 Connector Female to male Coaxial Cable(10cm\/3.9\")\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eFrequency - Max:6GHz | Impedance:50 Ohm | 0.81MM Cable is double-shielded,low-loss and very flexible\/easily bendable.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eOur MHF4 connectors are precision machined and gold-plated for low loss.| can be used for small devices, space saving.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eMake sure you are familiar with your connectors before buying, As stated in the listing MHF4 will NOT work for Mini PCIe Wireless Card. They are for NGFF Wireless Card known as MHF4 only.Notice:The ufl male is very weak as you know,so please be careful when you use this cable,If you unfortunately get a defective one, please contact our customer support.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eAntenna WiFi Cable for Intel 7260NGW 7265NGW 8260NGW 8265NGW 9260NGW NGFF Wireless Card \u0026amp; M.2 (NGFF) WiFi \/ WLAN \/ 3G \/ 4G \/ LTE Modules\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":40096163627043,"sku":"OL-3803-2X","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-3803_1.jpg?v=1691569636"},{"product_id":"ufl-to-sma-m-2-ngff-ipx-ipex-mhf4-to-rp-sma-female-male-pin-rf-pigtail-wifi-antenna-extension-cable-0-81mm-for-pci-wifi-card-wireless-router-m-2-cards-pack-of-2","title":"UFL to SMA M.2 NGFF  MHF4 to RP SMA Female (Male pin) RF Pigtail WiFi Antenna Extension Cable 0.81mm for PCI WiFi Card Wireless Router M.2 Cards Pack of 2","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\" data-mce-fragment=\"1\"\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eFit 7260NGW 7265NGW 8260NGW 8265NGW 9260NGW NGFF Wireless Card \u0026amp; M.2 (NGFF) WiFi \/ WLAN \/ 3G \/ 4G \/ LTE Modules Intel Dual Band Wireless-AC, Intel Wireless Gigabit Antenna M10041R,Intel Tri-Band Wireless-AC 17265, 7260 802.11ac WIFI Board\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eufl Cables Have Bulkhead Gold Plated Connector,ufl Terminal Block Connector for mini pci card,U.FL MHF4,Wide application: Mobile phones, Antenna, WLAN, Mini PCI, Bluetooth, PDA, GPS, drone, transmitter, electronic measuring instrument\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eGender: RP SMA Female  MHF4;Cable Length: 5cm,10cm,15cm,25cm,50cm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eApplicable cable: 0.81mmRF coaxial cable; Application Technology: IEEE802.12 a\/b\/g\/n, WiMax, Zigbee, Bluetooth Wireless\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003ePackage Content : 2 x RP SMA to ufl cable (Make sure you are familiar with your connectors before buying, As stated in the listing MHF4 will NOT work for Mini PCIe Wireless Card. They are for NGFF Wireless Card known as MHF4 only.)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONELINKMORE","offers":[{"title":"5 CM","offer_id":40098963652643,"sku":"OL-4012-2X","price":8.89,"currency_code":"USD","in_stock":true},{"title":"10 CM","offer_id":40098963685411,"sku":"OL-4008-2X","price":9.29,"currency_code":"USD","in_stock":true},{"title":"15 CM","offer_id":40098963718179,"sku":"OL-4010-2X","price":9.39,"currency_code":"USD","in_stock":true},{"title":"25 CM","offer_id":40098963750947,"sku":"OL-4014-2X","price":9.89,"currency_code":"USD","in_stock":true},{"title":"50 CM","offer_id":40098963783715,"sku":"OL-4016-2X","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-4016_50.jpg?v=1692084236"},{"product_id":"ufl-to-sma-m-2-ngff-sma-female-jack-bulkhead-to-ipx-ipex-mhf4-rf-pigtail-wifi-antenna-extension-cable-for-pci-wifi-card-wireless-router-m-2-cards-0-81mm-pack-of-2","title":"UFL to SMA M.2 NGFF SMA Female Jack Bulkhead to MHF4 RF Pigtail WiFi Antenna Extension Cable for PCI WiFi Card Wireless Router M.2 Cards 0.81mm Pack of 2","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\" data-mce-fragment=\"1\"\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eApplicable cable: 0.81mm RF coaxial cable ; Application Technology: IEEE802.12 a\/b\/g\/n, WiMax, Zigbee, Bluetooth Wireless\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eufl Cables Have Bulkhead Gold Plated Connector,ufl Terminal Block Connector for mini pci card,U.FL MHF4;Wide application: Mobile phones, Antenna, WLAN, Mini PCI, Bluetooth, PDA, GPS, drone, transmitter, electronic measuring instrument\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eMake sure you are familiar with your connectors before buying, As stated in the listing MHF4 will NOT work for Mini PCIe Wireless Card. They are for NGFF Wireless Card known as ufl (MHF4) only.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eCable Length: 5cm,10cm,15cm,25cm,50cm; Fit 7260NGW 7265NGW 8260NGW 8265NGW 9260NGW NGFF Wireless Card \u0026amp; M.2 (NGFF) WiFi \/ WLAN \/ 3G \/ 4G \/ LTE Modules Intel Dual Band Wireless-AC, Intel Wireless Gigabit Antenna M10041R,Intel Tri-Band Wireless-AC 17265, 7260 802.11ac WIFI Board\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003ePackage Content : 2 x SMA to MHF4 cable\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONELINKMORE","offers":[{"title":"5 CM","offer_id":40098963882019,"sku":"OL-4011-2X","price":8.89,"currency_code":"USD","in_stock":true},{"title":"10 CM","offer_id":40098963914787,"sku":"OL-4007-2X","price":9.29,"currency_code":"USD","in_stock":true},{"title":"15 CM","offer_id":40098963947555,"sku":"OL-4009-2X","price":9.59,"currency_code":"USD","in_stock":true},{"title":"25 CM","offer_id":40098963980323,"sku":"OL-4013-2X","price":9.69,"currency_code":"USD","in_stock":true},{"title":"50 CM","offer_id":40098964013091,"sku":"OL-4015-2X","price":9.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-4011_5.jpg?v=1692084534"},{"product_id":"sma-type-connector-sma-male-to-female-rf-fpv-antenna-adapter-sma-wifi-antenna-cable-connector-right-angle-adapter-for-2g-3g-4g-lte-antenna-router-ham-radio-dab-wlan-lan-coax-cable-pack-of-2","title":"SMA Type Connector SMA Male to Female RF FPV Antenna Adapter SMA WiFi Antenna Cable Connector Right Angle Adapter for 2G 3G 4G LTE Antenna Router ham Radio DAB WLAN LAN Coax Cable Pack of 2","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\" data-mce-fragment=\"1\"\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eApplications: Radio Talkie-Walkie-Amateur Homematic CCU3, CCU2, CCU1, CHARLY, radio module from ELV, RaspberryMatic Raspberry Pi CC1101 Dimmer 2 Bypass 2 Motion Flood Smoke Door Window Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eThe connector housing and pin in center are made of pure brass to ensure a lower VSWR for higher transmission efficiency;SMA Male with A pin in center to SMA Female with A hole in center,male SMA to female SMA adapter has a straight\/rightangle body. This SMA coax adapter is a in-line RF adapter.Our SMA to SMA adapter is a in-series coaxial adapter design. This 50 Ohm SMA adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 6 GHz.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eThe SMA adapters Made of pure brass, has good connectivity. Antenna connectors for 4G LTE antenna devices, two-way radio, audio, video, cellular and other test equipment are widely used in low-frequency devices.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eOur SMA to SMA adapter is a coaxial adapter design with a 50 Ohm impedance. This 50 Ohm SMA adapter is manufactured to precise RF adapter specifications . Insertion loss≤0.15dB\/3GHz,VSWR≤1.1;Teflon Insulator ; Color: Gold\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003ePackage Content : 2 x SMA Male to Female Radios Adapters\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":40107705466915,"sku":"OL0444-2X","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL0444_3.jpg?v=1693471212"},{"product_id":"sma-male-antenna-adapter-fpv-antenna-adapter-sma-adapter-splitter-2-way-sma-male-to-dual-sma-female-connector-splitter-antenna-converter-for-lan-devices-coaxial-fpv-radio-baofeng-yaesu-pack-of-2","title":"SMA Male Antenna Adapter FPV Antenna Adapter SMA Adapter Splitter 2-Way SMA Male to Dual SMA Female Connector Splitter Antenna Converter for LAN Devices Coaxial FPV Radio Baofeng Yaesu Pack of 2","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\" data-mce-fragment=\"1\"\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003ePlease look at the images to make sure you have the correct connector! THIS IS NOT RG6 ADAPTER!! We usually have two or three orders per month that are sent back because the customer mixed up TV connector vs SMA connector (This SMA Connector is NOT fit for TV, it can not improve antenna signal,it's just an adapter); Standard SMA connectors are commonly used on Cellular 3G 4G LTE devices.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eSMA Series Adapter (THIS IS NOT RG6 ADAPTER!!)---Connector 1 and 2: SMA Jack with Female Basket in, Standard Polarity, 50 Ohm, Brass Body Material, Gold Body Plating;Connector 3: SMA Male, Standard Polarity, Impedance：50Ω, Insertion loss≤0.15dB\/6GHz,VSWR≤1.1, Brass Body Material, Gold Body Plating\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003e[RANGE OF APPLICATION]They are used on things like RF test equipment, Software Defined Radio (SDR) equipment, drones, some GPS equipment, etc and they are NOT for TV, Cable TV, Satellite TV, CB’s, etc.SMA to SMA adapter is constructed with male gender on side 1 and female on side 2. SMA male to SMA female coaxial adapter is a tee body style. This tee SMA adapter is also known as a SMA T connector.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eLIGHTWEIGHT, TINY - 6g weight. 0.747 in x 0.303 in x 0.643 in( Length x Width x Height );This SMA Connector is NOT fit for TV;SMA T Adapter Female (Jack)-Male (Plug)-Female (Jack).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003ePACKAGE - 2 x SMA Male to Dual SMA Female splitter cable adapter Connector(These are SMA connectors. They are used on things like RF test equipment, Software Defined Radio (SDR) equipment, drones, some GPS equipment, etc. They are NOT for TV, Cable TV, Satellite TV, CB’s, etc.),please check the size before make order, They are NOT for TV, Cable TV, Satellite TV, CB’s. it can not improve antenna signal,it's just an adapter\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":40107707858979,"sku":"OL1671-2X","price":9.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL1671_1.jpg?v=1693471809"},{"product_id":"dual-band-wifi-antenna-2-4g-5g-5-8ghz-router-antenna-sma-male-universal-antenna-dual-band-antenna-for-pc-desktop-fpv-drone-ps4-asus-ac88u-ac87u-antennas-wlan-wifi-antenne-booster-pack-of-2","title":"Dual Band WiFi Antenna 2.4G 5G 5.8GHz Router Antenna SMA Male Universal Antenna Dual-Band Antenna for PC Desktop FPV Drone PS4 ASUS AC88U AC87U Antennas WLAN WiFi Antenne Booster Pack of 2","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\" data-mce-fragment=\"1\"\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eDual-band Wireless Adapter Antenna Main Technical Specifications: Frequency Range: 2400-2500MHz\/ 4900-5900MHz; VSWR: below to 1.5 ; Gain: 5 DBi; Polarization Vertical; Maxlmum input Power:50W; Impedance: 50ohm ; Connector Type: SMA Male ; Length: 19.5 cm;\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eThe Dual-band omnidirectional antenna wireless network card of the wireless router with SMA interface can use this antenna for wireless routing for RT AC68U\/EX6200\/AC15\/AC68U\/RT AC88U\/AC88U\/AC3200\/AC66U.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eIndoor dual-band antenna metal SMA antenna interface with internal pure copper antenna array RG178 cable which embodies the superior performance of the antenna.Made of high quality material, it is not only durable, but also it can help wireless router gain much more powerful signal.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eHigh gain dual-band antenna compatible with: Wireless Network Router, WiFi AP Hotspot Modem, WiFi USB Adapter, WiFi module, WiFi Wireless HDMI Extender, Receiver Transmitter, Desktop PC Wireless Mini PCI Express PCIE Network antenna Adapter;\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003ePacket Content: 2pcs White Dual Band SMA Antenna\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":40108180832291,"sku":"OL-4748-2X","price":10.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-4748_2.jpg?v=1693553055"},{"product_id":"dual-band-wifi-antenna-2-4g-5g-5-8ghz-router-antenna-rp-sma-male-universal-antenna-2-4g-5-8g-dual-band-antenna-for-pc-desktop-fpv-drone-asus-ac88u-antennas-wlan-wifi-antenne-booster-pack-of-2","title":"Dual Band WiFi Antenna 2.4G 5G 5.8GHz Router Antenna RP SMA Male Universal Antenna 2.4G 5.8G Dual-Band Antenna for PC Desktop FPV Drone ASUS AC88U Antennas WLAN WiFi Antenne Booster Pack of 2","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\" data-mce-fragment=\"1\"\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003e2.4G 5.8G Dual-band Antenna Main Technical Specifications: Frequency Range: 2400-2500MHz\/ 4900-5900MHz; VSWR: below to 1.5 ; Gain: 5 DBi; Polarization Vertical; Maxlmum input Power:50W; Impedance: 50ohm ; Connector Type: RP SMA Male ; Length: 19.5 cm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eThe Dual-band wifi antenna wireless network card of the wireless router with RP SMA interface can use this antenna for wireless routing for RT AC68U\/EX6200\/AC15\/AC68U\/RT AC88U\/AC88U\/AC3200\/AC66U.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eMetal SMA antenna interface with internal pure copper antenna array RG178 cable which embodies the superior performance of the antenna.Dual-band wireless adapter antenna made of high quality material, it is not only durable, but also it can help wireless router gain much more powerful signal.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eHigh gain dual-band antenna compatible with: Wireless Network Router, WiFi AP Hotspot Modem, WiFi USB Adapter, WiFi module, WiFi Wireless HDMI Extender, Receiver Transmitter, Desktop PC Wireless Mini PCI Express PCIE Network antenna Adapter;\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003ePacket Content: 2pcs White Dual Band RP SMA Antenna\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":40109431750691,"sku":"OL-4747-2X","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-4747_2.jpg?v=1693818253"},{"product_id":"sma-type-connector-sma-male-to-female-rf-fpv-antenna-adapter-sma-wifi-antenna-cable-connector-right-angle-adapter-for-2g-3g-4g-lte-antenna-router-ham-radio-dab-wlan-lan-coax-cable-pack-of-2-复制","title":"400 pieces SMA Type Connector SMA Male to Female RF FPV Antenna Adapter SMA WiFi Antenna Cable Connector Right Angle Adapter for 2G 3G 4G LTE Antenna Router ham Radio DAB WLAN LAN Coax Cable (TouchTronics, Inc.)","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\" data-mce-fragment=\"1\"\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eApplications: Radio Talkie-Walkie-Amateur Homematic CCU3, CCU2, CCU1, CHARLY, radio module from ELV, RaspberryMatic Raspberry Pi CC1101 Dimmer 2 Bypass 2 Motion Flood Smoke Door Window Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eThe connector housing and pin in center are made of pure brass to ensure a lower VSWR for higher transmission efficiency;SMA Male with A pin in center to SMA Female with A hole in center,male SMA to female SMA adapter has a straight\/rightangle body. This SMA coax adapter is a in-line RF adapter.Our SMA to SMA adapter is a in-series coaxial adapter design. This 50 Ohm SMA adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 6 GHz.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eThe SMA adapters Made of pure brass, has good connectivity. Antenna connectors for 4G LTE antenna devices, two-way radio, audio, video, cellular and other test equipment are widely used in low-frequency devices.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eOur SMA to SMA adapter is a coaxial adapter design with a 50 Ohm impedance. This 50 Ohm SMA adapter is manufactured to precise RF adapter specifications . Insertion loss≤0.15dB\/3GHz,VSWR≤1.1;Teflon Insulator ; Color: Gold\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003ePackage Content : 400 x SMA Male to Female Radios Adapters\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":40430658715683,"sku":"OL0444-400X","price":334.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL0444_3_e1ef83c9-b5ac-4ab5-b591-573490210a3a.jpg?v=1715069838"},{"product_id":"sma-male-to-female-fpv-antenna-adapter-2-pack-coaxial-cable-connector-low-loss-for-fpv-radio-wifi-antenna-extension-cable-network-analyzer","title":"SMA Male to Female FPV Antenna Adapter 2 Pack Coaxial Cable Connector, Low Loss for FPV Radio WiFi Antenna Extension Cable Network Analyzer","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eHigh-Quality SMA Connector Saver】SMA male to SMA female adapter, made of pure copper with gold-plated surface for better conductivity and durability. SMA Male with a pin in the center and SMA Female with a hole in the center.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e【Stable Signal \u0026amp; Low Loss】 50 Ohm impedance ensures excellent signal transfer and minimal loss. High-quality materials prevent oxidation and guarantee long-lasting connection performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e【Versatile Application】 Ideal for connecting SMA male devices to SMA female antennas or extension cables. Perfect for adapting or extending coaxial connections without affecting performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e【Wide Compatibility】 Widely used for Wi-Fi routers, antennas, RF projects, radios, wireless LAN devices, CCTV, GPS, and communication systems. Great for both home and professional use.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":42285185925155,"sku":"OL0116-2X","price":8.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL0116_1.jpg?v=1776322167"},{"product_id":"onelinkmore-ufl-to-rp-sma-female-with-1-13mm-antenna-wifi-pigtail-for-modify-dji-mavic-pro-remote-to-accept-any-standard-2-4-ghz-sma-style-pack-of-2","title":"onelinkmore UFL to RP-SMA Female with 1.13mm Antenna WiFi Pigtail for Modify DJI Mavic Pro Remote to Accept Any Standard 2.4 GHz SMA Style Pack of 2","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e100% Brand New and High Quality WiFi Antenna Cable for modify DJI Mavic Pro Remote to accept any standard 2.4 GHz SMA style\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eIPEX Cables Have Bulkhead Gold Plated Connector UFL Terminal Block Connector for mini pci card\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eGender: RP-SMA Jack,male pin\/Ufl\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eCable Length:10cm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003ePackage Content : 2 x RP-SMA to Ufl cable\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":42289259315235,"sku":"OL-4037-2X","price":13.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-4037_2.jpg?v=1776655590"},{"product_id":"tnc-female-to-mmcx-male-rightangle-bulkhead-o-ring-connector-rf-coax-adapter-extension-cable-20cm-rg174-pack-of-2","title":"TNC Female to MMCX male Rightangle Bulkhead O-ring Connector RF Coax Adapter Extension Cable 20CM RG174 Pack of 2","description":"\u003cp align=\"left\"\u003e\u003cspan\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cspan\u003eCable type:TNC Female to MMCX male RF coaxial connector\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cspan\u003eLength: 20CM\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cspan\u003eCable: RG 174\u003c\/span\u003e\u003c\/p\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":42289315086371,"sku":"OL-3147-2X","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-3147_3.jpg?v=1776675394"},{"product_id":"2-pieces-sma-female-bulkhead-right-angle-with-nut-to-mmcx-male-right-angle-rg316-12cm-pigtail-cable","title":"2 Pieces SMA Female bulkhead Right angle with nut to MMCX male Right angle RG316 12cm Pigtail Cable","description":"\u003cp align=\"left\"\u003e\u003cstrong\u003e\u003cspan\u003eSpecification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cspan\u003eProduct Name: SMA Female to MCX male\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cspan\u003eLength: 12 CM\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cspan\u003eCable: RG 316\u003c\/span\u003e\u003c\/p\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":42289613832227,"sku":"OL-4084-2X","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-4084-1.jpg?v=1776679067"},{"product_id":"onelinkmore-3-way-coax-splitter-kit-sma-rp-sma-3-way-splitter-rf-coaxial-connectors-assortment-male-female-mixed-gold-plated-brass-t-type-coax-adapter-set-for-sdr-fpv-ham-radio-wifi-antenna","title":"onelinkmore 3-Way Coax Splitter Kit, SMA \u0026 RP-SMA 3-Way Splitter RF Coaxial Connectors Assortment (Male\/Female\/Mixed), Gold Plated Brass T-Type Coax Adapter Set for SDR, FPV, Ham Radio, WiFi Antenna","description":"\u003cdiv class=\"geo-spec-block\"\u003e\u003cpre\u003e\n--- QUICK SPEC REFERENCE ---\nProduct: onelinkmore SMA RP-SMA 3-Way Coax Splitter Kit 10-Piece T-Type Assortment Gold Plated\nSKU: OL-9112\nPrice: $18.99\nBody Material: Brass\nContact Plating: Gold\nQuantity: 10 pieces per pack\nAvailability: In Stock — US warehouse, ships 1-2 business days\n---\n\u003c\/pre\u003e\u003c\/div\u003e\n\u003cdiv class=\"geo-description\"\u003e\n\u003cp\u003eThe SMA RP-SMA 3-Way Coax Splitter Kit 10-Piece T-Type Assortment Gold Plated is an RF interface component for field and bench RF applications.\u003c\/p\u003e\n\u003cp\u003eTechnical specifications — body material: Brass.\u003c\/p\u003e\n\u003cp\u003eShips from US warehouse. Confirm connector type, gender, and cable compatibility before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"geo-faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: What adapters are included in this kit?\u003c\/strong\u003e\n\u003cp\u003eThe kit contains all male\/female gender combinations of the connector types listed in the product title. This covers the most common conversion scenarios — check the product images for the exact adapter count and type breakdown.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Are all adapters in this kit the same impedance?\u003c\/strong\u003e\n\u003cp\u003eYes, all adapters in this kit are matched impedance (50 ohm unless otherwise specified). Do not mix with 75 ohm cable TV adapters even if connectors look similar — impedance mismatch degrades signal quality.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: What is the difference between SMA and RP-SMA?\u003c\/strong\u003e\n\u003cp\u003eStandard SMA male has a center pin; RP-SMA male has a center socket. They share the same thread but will not complete a connection at the center conductor. WiFi routers use RP-SMA; RF test equipment uses standard SMA. Kits that include both are labeled SMA\/RP-SMA.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Can I use these adapters for VNA port extension?\u003c\/strong\u003e\n\u003cp\u003eKit adapters work well for general field and bench use. For precision VNA measurements, use individual precision-grade adapters with specified VSWR and insertion loss values. Budget kit adapters may add 0.2–0.5 dB measurement uncertainty above 6 GHz.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: How do I identify which adapter I need from the kit?\u003c\/strong\u003e\n\u003cp\u003eIdentify the connector type and gender on your existing device port, then find the adapter in the kit that matches on one side and has your target connector on the other. If unsure, compare the thread size and center conductor configuration against the product images.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Are these adapters rated for outdoor use?\u003c\/strong\u003e\n\u003cp\u003eThese adapters use metal body construction suitable for protected outdoor use. For permanent outdoor installations, wrap connections with self-amalgamating silicone tape after installing. Do not leave outdoor RF connections unwrapped — moisture ingress causes corrosion and connector failure within months.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":42377302802467,"sku":"OL-9112","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-9112_1.jpg?v=1777002753"},{"product_id":"onelinkmore-u-fl-to-sma-female-pigtail-rf-coaxial-adapter-with-red-sealing-o-ring-large-hex-nut-1-13mm-mini-coax-for-internal-m-2-wifi-card-drone-fpv-mini-pc-pack-of-5","title":"onelinkmore U.FL to SMA Female Pigtail, RF Coaxial Adapter with Red Sealing O-Ring \u0026 Large Hex Nut, 1.13mm Mini Coax for Internal M.2 WiFi Card, Drone FPV, Mini PC Pack of 5","description":"\u003cdiv class=\"geo-spec-block\"\u003e\u003cpre\u003e\n--- QUICK SPEC REFERENCE ---\nProduct: U.FL to SMA Female Bulkhead Pigtail, Red O-Ring, Large Hex Nut, 1.13mm\nConnector A: U.FL Male (2.0mm OD — Mini PCIe standard)\nConnector B: SMA Female Bulkhead, Large Hex Nut, with 11.2mm Grooved Red Rubber O-Ring\nCable: 1.13mm mini coaxial\nImpedance: 50 Ohm\nO-Ring: Custom 11.2mm grooved red rubber — moisture and dust resistant\nAvailable Lengths: 1.97\" \/ 3.94\" \/ 5.91\" \/ 7.87\" \/ 9.84\" (select variant)\nNOT Compatible With: M.2 NGFF cards (AX200\/AX210) — those use 1.5mm MHF4 connector\nQuantity: 5 cables per pack\nPrice: $6.58\nIn Stock: Yes\n---\n\u003c\/pre\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"geo-description\"\u003e\n\u003cp\u003eThis U.FL to SMA female bulkhead pigtail stands out from standard pigtails through two hardware upgrades specifically suited to high-vibration and semi-outdoor applications: a custom 11.2mm grooved red rubber O-ring at the SMA bulkhead and an enlarged hex nut. The grooved O-ring design provides a more positive seal than smooth O-rings when compressed against an enclosure panel — the groove creates a mechanical interlock with the panel surface that resists the O-ring being pushed out under vibration or thermal cycling. The enlarged hex nut offers a significantly wider contact surface than standard thin-wall SMA nuts, preventing the connector from loosening in high-vibration environments such as racing drone frames, robotics enclosures, and vehicle-mounted electronics.\u003c\/p\u003e\n\n\u003cp\u003eThe 1.13mm mini coaxial cable is the correct diameter for U.FL terminations — flexible enough to route inside compact mini PCs, FPV drone airframes, and tight electronic enclosures without creating kinks that stress the U.FL solder joint on the board. Five length variants (1.97\" through 9.84\") cover the range from very compact enclosures to deeper chassis builds. The 5-piece pack is practical for production runs, batch builds, or projects requiring multiple antenna connections — at $6.58 for 5 pieces, the per-unit cost is significantly lower than individual pigtail purchases.\u003c\/p\u003e\n\n\u003cp\u003eCritical compatibility note: this cable uses a standard U.FL connector with a 2.0mm outer diameter, designed for Mini PCIe (mPCIe) wireless cards, Raspberry Pi modules, FPV drone VTX boards, and Arduino wireless shields. It will NOT fit M.2 NGFF WiFi cards (Intel AX200, AX210, 9260, 8265 etc.) which use the MHF4 connector with a 1.5mm outer diameter. MHF4 and U.FL look similar but are not interchangeable. Check your board's slot type: if it has an M.2 slot (key E or A+E), it uses MHF4. If it has a Mini PCIe slot (full-length rectangular connector), it uses U.FL.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"geo-faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: What makes the 11.2mm grooved red O-ring different from a standard O-ring?\u003c\/strong\u003e\n\u003cp\u003eA standard smooth O-ring creates a seal purely through compression — the rubber is squeezed flat against the panel surface and relies on friction to stay in position. The grooved design on this O-ring creates a channel around the connector body that the O-ring seats into, mechanically anchoring it against displacement during vibration and thermal expansion\/contraction cycles. The grooved design is more reliable than smooth O-rings for applications subject to vibration (drone airframes, vehicle enclosures) where a smooth O-ring might gradually work out of position and break the seal. The red color also makes it easier to visually confirm the O-ring is correctly seated during assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: How do I know if my device uses U.FL or MHF4?\u003c\/strong\u003e\n\u003cp\u003eThe most reliable method is to measure the connector diameter on your board: U.FL has a 2.0mm outer diameter (the metal snap-on ring is 2mm across); MHF4 has a 1.5mm outer diameter. Visually they look nearly identical, but U.FL is slightly larger. As a general rule: if your wireless card is in a Mini PCIe (mPCIe) slot — a rectangular connector approximately 51mm wide used in older laptops and embedded computers — it uses U.FL. If your card is in an M.2 slot (smaller, with a single mounting screw) — common in laptops made after approximately 2015 — it uses MHF4.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Which length variant should I choose?\u003c\/strong\u003e\n\u003cp\u003eMeasure the routing distance from your board's U.FL port to the SMA bulkhead mounting point on the enclosure wall, adding approximately 20–30mm for connection slack and routing curves. The 1.97\" (50mm) variant suits very compact builds where the board is mounted immediately behind the enclosure panel. The 3.94\" (100mm) variant covers most mini PC and standard gateway enclosure depths. The 5.91\" (150mm) and longer variants are for deeper chassis or setups where the board is mounted away from the wall. Excess cable length adds unnecessary insertion loss in the signal path and creates routing clutter inside the enclosure.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Is this suitable for FPV racing drone builds?\u003c\/strong\u003e\n\u003cp\u003eYes — the enlarged hex nut and grooved O-ring were specifically designed for high-vibration applications like racing drones. FPV drone video transmitters (VTX) typically have U.FL antenna ports, and mounting the SMA female bulkhead through the drone frame allows the external antenna to be attached externally while protecting the VTX's fragile U.FL port from repeated connect-disconnect cycles. The anti-vibration hex nut prevents the SMA connector from working loose during flight. The O-ring also helps seal the antenna mounting hole against light dust ingress in outdoor flying environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Can I use these in a Raspberry Pi project?\u003c\/strong\u003e\n\u003cp\u003eYes, for Raspberry Pi modules that have U.FL antenna ports — specifically the Raspberry Pi Compute Module 4 with WiFi, which has a U.FL antenna connector on the module itself. Standard Raspberry Pi 4B and 5 boards have internal antennas with no U.FL port. If you are building a custom Raspberry Pi CM4 carrier board with an external SMA antenna connection, this pigtail provides the U.FL-to-SMA-bulkhead connection with the O-ring seal needed for weatherproof project enclosures.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Why does the pack include 5 cables?\u003c\/strong\u003e\n\u003cp\u003eThe 5-piece pack serves several use cases: batch production of multiple identical IoT enclosures requiring one pigtail each; drone builders who build multiple quads and want consistent spare parts stock; lab environments where pigtails are regularly installed and removed across different test fixtures (U.FL connectors are rated for approximately 30 mating cycles, so spares are essential); and individual builders who want spares for future projects. At $6.58 for 5 pieces ($1.32 per cable), the 5-pack offers significantly better value than purchasing individual pigtails.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"ONELINKMORE","offers":[{"title":"1.97","offer_id":42377303523363,"sku":"OL-9132-5X","price":6.58,"currency_code":"USD","in_stock":true},{"title":"3.94","offer_id":42377303556131,"sku":"OL-4030-5X","price":6.68,"currency_code":"USD","in_stock":true},{"title":"5.91","offer_id":42377303588899,"sku":"OL-9133-5X","price":6.78,"currency_code":"USD","in_stock":true},{"title":"7.87","offer_id":42377303621667,"sku":"OL-9134-5X","price":6.88,"currency_code":"USD","in_stock":true},{"title":"9.84","offer_id":42377303654435,"sku":"OL-9135-5X","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-4030_11_1.jpg?v=1777003052"},{"product_id":"onelinkmore-sma-pigtail-cable-ufl-to-sma-female-jack-coupling-nut-hole-bulkhead-straight-o-ring-coaxial-cable-1-13-cable-pack-of-2","title":"onelinkmore SMA Pigtail Cable UFL to SMA Female Jack Coupling Nut Hole Bulkhead Straight O-Ring Coaxial Cable 1.13 Cable Pack of 2","description":"\u003cdiv class=\"geo-spec-block\"\u003e\u003cpre\u003e\n--- QUICK SPEC REFERENCE ---\nProduct: U.FL to SMA Female Bulkhead Pigtail Cable with O-Ring, 1.13mm\nConnector A: U.FL Male (2.0mm OD — Mini PCIe standard)\nConnector B: SMA Female Bulkhead, Large Hex Nut, with High-Density O-Ring\nCable: 1.13mm coaxial\nImpedance: 50 Ohm\nSignal Support: 2.4GHz \/ 5GHz WiFi, LTE, LoRaWAN\nAvailable Lengths: 1.96\" \/ 3.93\" \/ 5.9\" \/ 6.69\" \/ 7.87\" (select variant)\nQuantity: 2 cables per pack\nPrice: $8.58\nIn Stock: Yes\nNOT Compatible With: M.2 NGFF cards (AX200, AX210 etc.) — those use 1.5mm MHF4, not 2.0mm U.FL\n100% continuity tested before shipping\n---\n\u003c\/pre\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"geo-description\"\u003e\n\u003cp\u003eThis pigtail cable connects a U.FL port on a Mini PCIe wireless card, IoT board, Raspberry Pi module, or FPV drone VTX to a weatherproof SMA female bulkhead connector mounted through an enclosure wall — with one critical upgrade over standard pigtails: a high-density O-ring pre-installed on the SMA bulkhead that seals against rain and moisture without sealant tape or silicone. The enlarged hex nut provides a wider bearing surface against the enclosure panel, distributing the clamping force to prevent the connector from loosening under wind vibration or cable tension — a failure mode common with standard thin-nut bulkhead connectors on outdoor Helium miner and LoRa gateway builds.\u003c\/p\u003e\n\n\u003cp\u003eFive cable lengths are available (1.96\", 3.93\", 5.9\", 6.69\", 7.87\") to match the internal routing depth of different enclosures. Choose the shortest length that reaches from the board's U.FL port to the enclosure wall's mounting hole without excess slack — excess 1.13mm cable coiled inside a small enclosure adds unnecessary signal loss and creates tangle risk near cooling components. The 1.13mm cable maintains 50 ohm impedance across 2.4 GHz and 5 GHz WiFi, LTE, and LoRaWAN (433\/868\/915 MHz) frequencies, and each cable is 100% continuity tested before shipping.\u003c\/p\u003e\n\n\u003cp\u003eThe U.FL connector on this cable has a 2.0mm outer diameter — the correct size for Mini PCIe (mPCIe) wireless cards. It is NOT compatible with M.2 NGFF cards (Intel AX200, AX210, 9260, 8265 etc.), which use the smaller MHF4 connector with a 1.5mm outer diameter. Attempting to fit this U.FL plug onto an MHF4 port will not seat correctly and risks damaging the board's connector. If your device has an M.2 slot rather than a Mini PCIe slot, order MHF4-to-SMA pigtails instead.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"geo-faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: How does the O-ring seal work and does it require any sealant?\u003c\/strong\u003e\n\u003cp\u003eThe O-ring is a pre-installed rubber gasket that sits between the SMA female bulkhead body and the outer face of the enclosure panel. When the hex nut is tightened from inside the enclosure, it compresses the O-ring against the panel surface, creating a water-resistant seal around the connector mounting hole. No sealant tape or silicone is required — the O-ring provides the seal when properly torqued. The seal is effective against rain splash and condensation but is not rated for submersion; for fully submersible applications, additional sealing at the cable entry point is needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Which cable length should I choose for my Helium miner or LoRa gateway enclosure?\u003c\/strong\u003e\n\u003cp\u003eMeasure the distance from your board's U.FL antenna port to the inside face of the enclosure wall where the SMA bulkhead will be mounted, then add approximately 20–30mm for routing slack and connector seating. Common selections: 1.96\" (50mm) for very compact enclosures with the board mounted close to the wall; 3.93\" (100mm) for standard small project boxes and gateway enclosures; 5.9\" (150mm) for deeper enclosures or where the board is mounted away from the wall. Avoid choosing longer than necessary — excess cable must be coiled inside, which adds signal loss and clutter.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Is this compatible with Raspberry Pi and Arduino IoT builds?\u003c\/strong\u003e\n\u003cp\u003eYes, for Raspberry Pi modules and Arduino boards that have U.FL antenna ports — such as the Raspberry Pi Compute Module 4 with WiFi, or Arduino MKR modules with cellular connectivity. The U.FL connector snaps onto the board's U.FL port, and the SMA female bulkhead mounts through the project enclosure wall to accept a standard SMA male external antenna. Verify your specific board has a U.FL port (2.0mm) rather than an MHF4 port (1.5mm) before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Why is the large hex nut important?\u003c\/strong\u003e\n\u003cp\u003eStandard SMA female bulkhead connectors use a thin hex nut (approximately 6mm across flats) that provides a small contact area against the enclosure panel. Under repeated antenna connect-disconnect cycles or cable tension, this thin nut can work loose, rotating the connector body and eventually widening the mounting hole. The enlarged hex nut on this connector provides a wider bearing surface that is harder to loosen and distributes force more evenly across the panel face. For outdoor or high-vibration installations, this mechanical improvement significantly extends the reliable service life of the antenna mounting point.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: How do I install the SMA bulkhead through the enclosure wall?\u003c\/strong\u003e\n\u003cp\u003eDrill a hole in the enclosure wall sized for the SMA connector body — typically 6.5mm (approximately 1\/4 inch) for standard SMA bulkhead connectors. Insert the SMA female end through the hole from outside to inside (so the O-ring is compressed between the connector body flange and the outer enclosure surface). From inside, slide the hex nut onto the threaded portion and tighten with a wrench until the O-ring is visibly compressed — approximately 1–2 turns past finger-tight. Do not overtighten, as this can damage the O-ring seal.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Why does the pack include 2 cables?\u003c\/strong\u003e\n\u003cp\u003eMany Mini PCIe wireless cards, cellular modules, and IoT gateway boards have two U.FL antenna ports for MIMO diversity — one main antenna and one auxiliary\/diversity antenna. Building a properly sealed outdoor enclosure requires both ports to have weatherproof external connections. The 2-pack provides both cables needed for a complete dual-antenna enclosure build. Both cables are the same length (select the variant that matches your enclosure depth) for a symmetric installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"ONELINKMORE","offers":[{"title":"1.96","offer_id":42377328558115,"sku":"OL-4673-2X","price":8.58,"currency_code":"USD","in_stock":true},{"title":"3.93","offer_id":42377328590883,"sku":"OL-4674-2X","price":8.68,"currency_code":"USD","in_stock":true},{"title":"5.9","offer_id":42377328623651,"sku":"OL-4670-2X","price":8.78,"currency_code":"USD","in_stock":true},{"title":"6.69","offer_id":42377328656419,"sku":"OL-4671-2X","price":8.88,"currency_code":"USD","in_stock":true},{"title":"7.87","offer_id":42377328689187,"sku":"OL-4672-2X","price":8.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-4670_7.jpg?v=1777010659"},{"product_id":"onelinkmore-rg178-ufl-sma-coaxial-cable-ufl-mhf1-to-sma-female-right-angle-pigtail-jumper-coax-low-loss-extension-cable-for-wi-fi-radios-antenna-mini-pci-pack-of-5","title":"onelinkmore RG178 UFL SMA Coaxial Cable, UFL MHF1 to SMA Female Right Angle Pigtail Jumper Coax Low Loss Extension Cable for Wi-Fi Radios, Antenna, Mini PCI Pack of 5","description":"\u003cdiv class=\"geo-spec-block\"\u003e\u003cpre\u003e\n--- QUICK SPEC REFERENCE ---\nProduct: onelinkmore RG178 U.FL MHF1 to SMA Female Right Angle Low Loss Pigtail Cable Pack of 5\nPrice: $7.59\nImpedance: 50 Ohm\nCable Type: RG178\nQuantity: 5 pieces per pack\nAvailability: In Stock — US warehouse, ships 1-2 business days\n---\n\u003c\/pre\u003e\u003c\/div\u003e\n\u003cdiv class=\"geo-description\"\u003e\n\u003cp\u003eThe RG178 U.FL MHF1 to SMA Female Right Angle Low Loss Pigtail Cable is an RF interface component for field and bench RF applications.\u003c\/p\u003e\n\u003cp\u003eTechnical specifications — impedance: 50 Ohm.\u003c\/p\u003e\n\u003cp\u003eShips from US warehouse. Confirm connector type, gender, and cable compatibility before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"geo-faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: What is the insertion loss of this cable assembly?\u003c\/strong\u003e\n\u003cp\u003eLoss depends on cable type and frequency. RG316 loses approximately 0.8 dB\/m at 1 GHz and 1.5 dB\/m at 3 GHz. RG174 loses approximately 1.2 dB\/m at 1 GHz. Each connector adds approximately 0.1–0.2 dB. For critical signal paths, calculate total path loss before selecting cable length.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Is this assembly double-shielded?\u003c\/strong\u003e\n\u003cp\u003eCheck the product specifications for shielding details. Double-shielded cables (two layers of braid or braid + foil) provide better EMI rejection than single-shielded cables and are preferred in environments with strong interference sources or for sensitive receiver feedlines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Can I use this cable outdoors?\u003c\/strong\u003e\n\u003cp\u003eIndoor-rated cable assemblies should not be used outdoors permanently without weatherproofing. Apply self-amalgamating silicone tape over all connector interfaces. For permanent outdoor runs, use cable with UV-resistant jacket and bulkhead connectors with O-ring seals at building penetration points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: What bend radius is safe for this cable?\u003c\/strong\u003e\n\u003cp\u003eThe minimum safe bend radius is approximately 5× the cable outer diameter for flexible coax. Tighter bends permanently kink the center conductor and shield, increasing VSWR and insertion loss. For RG316 (2.5mm OD), minimum bend radius is approximately 12mm. Do not route cables around sharp corners.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Can I extend this cable by chaining two assemblies?\u003c\/strong\u003e\n\u003cp\u003eYes, using a barrel adapter. Each additional connection adds approximately 0.1–0.2 dB. For critical signal paths, use a single cable of the required length rather than chaining. Keep total adapter count below 3 in any signal path.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: What connector torque should I apply?\u003c\/strong\u003e\n\u003cp\u003eSMA connectors: 5 in-lbs (0.56 N·m). N-type: 12–15 in-lbs. BNC: hand-tight plus quarter-turn bayonet lock. TNC: 8–10 in-lbs. Use a calibrated RF torque wrench for repeatable results. Over-tightening deforms contacts; under-tightening causes intermittent VSWR problems above 3 GHz.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ONELINKMORE","offers":[{"title":"5","offer_id":42377330360355,"sku":"OL-3314-5X","price":7.59,"currency_code":"USD","in_stock":true},{"title":"10","offer_id":42377330393123,"sku":"OL-3315-5X","price":7.59,"currency_code":"USD","in_stock":true},{"title":"15","offer_id":42377330425891,"sku":"OL-3316-5X","price":7.69,"currency_code":"USD","in_stock":true},{"title":"25","offer_id":42377330458659,"sku":"OL-3318-5X","price":7.69,"currency_code":"USD","in_stock":true},{"title":"30","offer_id":42377330491427,"sku":"OL-3319-5X","price":7.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-3315_5.jpg?v=1777011504"},{"product_id":"onelinkmore-pigtail-antenna-wifi-coaxial-low-loss-cable-sma-female-right-angle-bulkhead-to-rf-u-fl-1-13-cable-5cm-for-wireless-routers-pack-of-2","title":"onelinkmore Pigtail Antenna WiFi Coaxial Low Loss Cable SMA Female Right Angle Bulkhead to RF U.FL 1.13 Cable 5cm for Wireless Routers Pack of 2","description":"\u003cdiv class=\"geo-spec-block\"\u003e\u003cpre\u003e\n--- QUICK SPEC REFERENCE ---\nProduct: onelinkmore SMA Female Right Angle Bulkhead to U.FL 1.13mm 5cm Pigtail for Mini PCIe Pack of 2\nSKU: OL-3846-2X\nPrice: $6.89\nCable Length: 5cm\nQuantity: 2 pieces per pack\nTypical Applications: Mini PCIe cards ONLY\nAvailability: In Stock — US warehouse, ships 1-2 business days\n---\n\u003c\/pre\u003e\u003c\/div\u003e\n\u003cdiv class=\"geo-description\"\u003e\n\u003cp\u003eThe SMA Female Right Angle Bulkhead to U.FL 1.13mm 5cm Pigtail for Mini PCIe is an RF interface component designed for Mini PCIe cards ONLY.\u003c\/p\u003e\n\u003cp\u003eBuilt to standard RF connector specifications with quality metal construction.\u003c\/p\u003e\n\u003cp\u003eCompatibility note: NOT for M. Verify connector type and cable diameter before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"geo-faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: What is the insertion loss of this cable assembly?\u003c\/strong\u003e\n\u003cp\u003eLoss depends on cable type and frequency. RG316 loses approximately 0.8 dB\/m at 1 GHz and 1.5 dB\/m at 3 GHz. RG174 loses approximately 1.2 dB\/m at 1 GHz. Each connector adds approximately 0.1–0.2 dB. For critical signal paths, calculate total path loss before selecting cable length.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Is this assembly double-shielded?\u003c\/strong\u003e\n\u003cp\u003eCheck the product specifications for shielding details. Double-shielded cables (two layers of braid or braid + foil) provide better EMI rejection than single-shielded cables and are preferred in environments with strong interference sources or for sensitive receiver feedlines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Can I use this cable outdoors?\u003c\/strong\u003e\n\u003cp\u003eIndoor-rated cable assemblies should not be used outdoors permanently without weatherproofing. Apply self-amalgamating silicone tape over all connector interfaces. For permanent outdoor runs, use cable with UV-resistant jacket and bulkhead connectors with O-ring seals at building penetration points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: What bend radius is safe for this cable?\u003c\/strong\u003e\n\u003cp\u003eThe minimum safe bend radius is approximately 5× the cable outer diameter for flexible coax. Tighter bends permanently kink the center conductor and shield, increasing VSWR and insertion loss. For RG316 (2.5mm OD), minimum bend radius is approximately 12mm. Do not route cables around sharp corners.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Can I extend this cable by chaining two assemblies?\u003c\/strong\u003e\n\u003cp\u003eYes, using a barrel adapter. Each additional connection adds approximately 0.1–0.2 dB. For critical signal paths, use a single cable of the required length rather than chaining. Keep total adapter count below 3 in any signal path.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: What connector torque should I apply?\u003c\/strong\u003e\n\u003cp\u003eSMA connectors: 5 in-lbs (0.56 N·m). N-type: 12–15 in-lbs. BNC: hand-tight plus quarter-turn bayonet lock. TNC: 8–10 in-lbs. Use a calibrated RF torque wrench for repeatable results. Over-tightening deforms contacts; under-tightening causes intermittent VSWR problems above 3 GHz.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":42378171383843,"sku":"OL-3846-2X","price":6.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-3846_7.jpg?v=1777019317"},{"product_id":"onelinkmore-sma-connector-fpv-antennas-radio-adapter-sma-female-to-female-barrel-adapter-antenna-jack-adapter-sma-coupler-adapter-for-wireless-lan-devices-coaxial-cable-pack-of-2","title":"onelinkmore SMA Connector FPV Antennas Radio Adapter SMA Female to Female Barrel Adapter Antenna Jack Adapter SMA Coupler Adapter for Wireless LAN Devices Coaxial Cable Pack of 2","description":"\u003cdiv class=\"geo-spec-block\"\u003e\u003cpre\u003e\n--- QUICK SPEC REFERENCE ---\nProduct: SMA Female to Female Barrel Adapter (SMA Coupler)\nSKU: OL1186\nConnector A: SMA Female (center hole, external threads)\nConnector B: SMA Female (center hole, external threads)\nBody Material: Brass, Pure Copper Housing\nImpedance: 50 Ohm\nApplications: WLAN, FPV, cellular 3G\/4G, extending SMA cables\nQuantity: 2 adapters per pack\nPrice: $5.99\nIn Stock: Yes\n---\n\u003c\/pre\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"geo-description\"\u003e\n\u003cp\u003eThis SMA female-to-female barrel adapter (also called an SMA coupler or gender changer) joins two SMA male plugs end-to-end, effectively extending an SMA cable or connecting two SMA-terminated cables without soldering or re-terminating. The adapter accepts SMA male plugs at both ends, making it suitable for extending antenna cables, coupling test equipment to antenna ports, and connecting two SMA male pigtail cables in series wherever a longer cable is needed but replacement is impractical.\u003c\/p\u003e\n\n\u003cp\u003eCommon applications include extending WiFi router pigtail cables to reach an external antenna mounting point, coupling an SMA-terminated antenna cable to an SMA-terminated SDR dongle or FPV receiver, connecting two sections of SMA-male-terminated coaxial cable for temporary extensions on test benches, and providing a coupler point in antenna distribution systems. The pure copper housing and brass body provide good RF conductivity and mechanical durability for repeated mating cycles.\u003c\/p\u003e\n\n\u003cp\u003eThis is a standard SMA female-to-female adapter — both ends have a center hole and accept SMA male plugs (with center pins). It is NOT an RP-SMA coupler. RP-SMA female-to-female couplers have center pins on both ends and are used with RP-SMA male (center hole) plugs. Verify your cables and equipment use standard SMA male connectors (center pin) before ordering. Standard SMA is used on RTL-SDR dongles, most RF test equipment, handheld radios, and cellular signal equipment; RP-SMA is used on WiFi routers and FPV video transmitters.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"geo-faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: What is an SMA barrel adapter used for?\u003c\/strong\u003e\n\u003cp\u003eAn SMA barrel adapter (SMA F-F coupler) joins two SMA male connectors in line. The most common uses are: extending an SMA cable that is too short by coupling it to a second cable; connecting an antenna pigtail cable (SMA male) to a test instrument port extension cable (also SMA male); creating a connection point in an antenna system where two cable sections meet; and adapting SMA male to SMA male in configurations where both sides have male connectors and a coupler is needed to join them.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Will using a barrel adapter degrade my WiFi or SDR signal?\u003c\/strong\u003e\n\u003cp\u003eA quality SMA barrel adapter introduces approximately 0.1–0.2 dB of insertion loss at frequencies below 3 GHz — negligible for practical WiFi, SDR, and cellular applications. The connection quality matters more than the adapter itself: ensure both SMA male plugs are properly threaded into the coupler (finger-tight plus 1\/4 turn) to maintain 50 ohm impedance continuity. A loose connection introduces far more signal loss than the adapter's inherent insertion loss.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Can I use this to extend my RTL-SDR dongle's antenna cable?\u003c\/strong\u003e\n\u003cp\u003eYes. RTL-SDR Blog v3 and most RTL-SDR dongles have SMA female ports. The included antenna cable has an SMA male plug. If you need a longer antenna cable, connect your existing cable's SMA male end to one side of this coupler, and connect a second SMA-male-terminated cable of any desired length to the other side. The coupler passes the signal from one cable to the next with minimal loss.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Is this compatible with FPV video transmitters?\u003c\/strong\u003e\n\u003cp\u003eIt depends on the connector type. Many FPV video transmitters use RP-SMA (Reverse Polarity SMA) connectors, which have a center pin rather than a center hole. This standard SMA female-to-female coupler will NOT mate with RP-SMA male connectors — the center pin of the RP-SMA male will contact the wrong part of the coupler. Check whether your FPV transmitter and antenna use standard SMA (center hole on the female end) or RP-SMA (center pin on the female end) before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: How many mating cycles can this adapter handle?\u003c\/strong\u003e\n\u003cp\u003eStandard SMA connectors are specified for a minimum of 500 mating cycles. Quality brass SMA couplers typically exceed this specification in normal use. For a bench adapter that is connected and disconnected daily, this provides several years of service before wear begins to affect connection consistency. For permanent or semi-permanent installations where the coupler is rarely disconnected, the service life is effectively indefinite.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Why does the pack include 2 adapters?\u003c\/strong\u003e\n\u003cp\u003eHaving two couplers is useful for dual-antenna systems (such as MIMO WiFi setups requiring two antenna connections) or for test benches where the same coupling is needed at two measurement points simultaneously. A spare is also valuable since barrel adapters are frequently used in field applications where loss or damage is possible, and having a replacement prevents interruption of an ongoing test or monitoring session.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":42379924275235,"sku":"OL1186-2X","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL1186_4.jpg?v=1777262157"},{"product_id":"onelinkmore-u-fl-cable-u-fl-male-to-female-pigtail-antenna-wifi-coaxial-low-loss-cable-ufl-u-fl-rf-coaxial-extension-cord-23-inch-pack-of-2","title":"onelinkmore U.FL Cable U.FL Male to Female Pigtail Antenna WiFi Coaxial Low Loss Cable UFL\/u.fl RF Coaxial Extension Cord 23 inch Pack of 2","description":"\u003cdiv class=\"geo-spec-block\"\u003e\u003cpre\u003e\n--- QUICK SPEC REFERENCE ---\nProduct: U.FL Male to U.FL Female Low Loss Extension Cord, 23 inch\nSKU: OL-2198-2X\nConnector A: U.FL Male (plug)\nConnector B: U.FL Female (jack)\nCable: 1.37mm double-shielded coaxial\nCable Length: 23 inches (approximately 58cm)\nFrequency Range: DC to 6 GHz\nImpedance: 50 Ohm\nQuantity: 2 cables per pack\nPrice: $6.58\nIn Stock: Yes\n---\n\u003c\/pre\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"geo-description\"\u003e\n\u003cp\u003eThis U.FL male-to-female extension cord adds 23 inches (approximately 58cm) of reach to any existing U.FL antenna connection, allowing an internal wireless card, IoT module, or LoRa board's U.FL antenna port to be extended to a more optimal antenna position within a chassis or enclosure. The U.FL male end plugs into the board's existing U.FL female port, and the U.FL female end provides a new connection point for the antenna's U.FL male plug — effectively relocating the antenna connection point without modifying the board or any existing cables.\u003c\/p\u003e\n\n\u003cp\u003eThe 1.37mm double-shielded cable provides better signal integrity than the 1.13mm single-shielded cable used in shorter pigtails, with the double shielding reducing EMI pickup and signal radiation along the cable run. At DC to 6 GHz frequency rating, this extension covers 2.4 GHz WiFi, 5 GHz WiFi, sub-6 GHz 5G NR, and all LoRa\/LoRaWAN frequencies (433\/868\/915 MHz). The 50 ohm impedance is maintained throughout the cable and both connectors.\u003c\/p\u003e\n\n\u003cp\u003eU.FL connectors (also called IPX, MHF1, AMC, or UMCC) are rated for approximately 30 mating cycles. This extension cord's U.FL female end will experience mating cycles from antenna connections and disconnections — keep unnecessary disconnections to a minimum. The U.FL male end that plugs into the board should be seated once and left undisturbed; repeated removal and reinsertion of U.FL plugs from PCB-mounted sockets risks damaging the solder joint on the board. This cable is NOT compatible with MHF4 connectors used on M.2 NGFF cards.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"geo-faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Why would I need to extend a U.FL connection?\u003c\/strong\u003e\n\u003cp\u003eCommon scenarios: a mini PCIe WiFi card installed in a desktop PC needs its antenna cable extended to reach antenna mounts on the case exterior; a LoRa module inside a sealed enclosure needs its antenna connection extended to a panel-mount N-female or SMA-female connector on the enclosure wall; a small IoT board inside a project box needs an external antenna for better wireless performance; or an existing U.FL pigtail cable is too short to reach the desired antenna position. This extension cord adds 23 inches of reach without re-terminating any existing cables.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Will extending the U.FL cable cause signal loss?\u003c\/strong\u003e\n\u003cp\u003eYes, all cable has insertion loss. At 2.4 GHz, 1.37mm double-shielded cable has approximately 0.5–0.8 dB\/meter of attenuation. At 23 inches (58cm), this translates to approximately 0.3–0.5 dB of additional loss compared to a direct U.FL connection — a small but measurable reduction in signal strength. In most practical applications (WiFi at home, LoRa gateway within normal range), this loss is not significant enough to meaningfully affect performance. For long cable runs where loss is critical, lower-loss cables with larger diameters are preferable.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Is this compatible with M.2 NGFF wireless cards?\u003c\/strong\u003e\n\u003cp\u003eNo. M.2 NGFF cards (Intel 7260, 8260, 8265, 9260, AX200, etc.) use MHF4 connectors, which are smaller than U.FL (approximately 1.6mm versus 2mm). This extension cord has U.FL connectors sized for Mini PCIe cards and similar U.FL-port devices. MHF4 and U.FL are not interchangeable. For M.2 NGFF cards, use MHF4-to-MHF4 extension cables or MHF4 pigtails specifically sized for those connectors.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: How do I connect and disconnect U.FL connectors safely?\u003c\/strong\u003e\n\u003cp\u003eTo connect: align the U.FL male plug over the U.FL female socket and press straight down with a fingertip until it clicks into place. To disconnect:\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":42379996856355,"sku":"OL-2198-2X","price":6.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-2198_8.jpg?v=1777273509"},{"product_id":"onelinkmore-sma-male-to-rp-sma-male-adapter-rf-coaxial-coax-gender-changer-coupler-sma-pin-to-reverse-polarity-rp-sma-hole-converter-for-wifi-antenna-extension-cable-fpv-drone-pack-of-2","title":"onelinkmore SMA Male to RP-SMA Male Adapter RF Coaxial Coax Gender Changer Coupler SMA (Pin) to Reverse Polarity RP-SMA (Hole) Converter for WiFi Antenna Extension Cable, FPV Drone Pack of 2","description":"\u003cdiv class=\"geo-spec-block\"\u003e\u003cpre\u003e\n--- QUICK SPEC REFERENCE ---\nProduct: SMA Male to RP-SMA Male Gender Changer Adapter\nSKU: OL0842-2X\nConnector A: SMA Male (standard — center pin)\nConnector B: RP-SMA Male (reverse polarity — center hole)\nBody Material: Brass, Gold Plated\nImpedance: 50 Ohm\nApplications: WiFi antenna extension cable, FPV drone, converting standard SMA to RP-SMA WiFi devices\nQuantity: 2 adapters per pack\nPrice: $9.98\nIn Stock: Yes\n---\n\u003c\/pre\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"geo-description\"\u003e\n\u003cp\u003eThis adapter converts a standard SMA male connector (center pin) to an RP-SMA male connector (center hole), enabling SMA-terminated cables and equipment to connect to RP-SMA female ports on WiFi routers, wireless access points, and FPV equipment. The fundamental difference between standard SMA and RP-SMA is the center conductor: standard SMA male has a protruding center pin, while RP-SMA male has a center hole (socket). Despite identical outer thread dimensions, these two standards are electrically incompatible without an adapter — the center conductor does not make contact when standard SMA is threaded into RP-SMA without one.\u003c\/p\u003e\n\n\u003cp\u003eCommon applications include connecting a standard SMA-terminated antenna extension cable to a WiFi router's RP-SMA female port; adapting SMA-terminated test equipment cables to RP-SMA-port WiFi access points for antenna pattern testing or signal analysis; converting the antenna connection on FPV equipment between SMA and RP-SMA standards; and enabling standard SMA pigtail cables to reach RP-SMA-port devices that are physically offset from the cable routing path.\u003c\/p\u003e\n\n\u003cp\u003eThis adapter has SMA male on one end and RP-SMA male on the other — both ends are male (plugs). It connects between two female ports: one SMA female and one RP-SMA female. This is a male-to-male gender changer, not a cable. For connecting an SMA male cable to an RP-SMA female device, this adapter inserts between the cable's SMA male plug and the device's RP-SMA female port. If your cable has an SMA female end and you need to reach an RP-SMA female port, a different adapter configuration is required.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"geo-faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Why can't I just thread a standard SMA connector into an RP-SMA port?\u003c\/strong\u003e\n\u003cp\u003eStandard SMA and RP-SMA have identical outer thread dimensions, so they will thread together mechanically. However, standard SMA male (center pin) inserted into RP-SMA female (also center pin) results in pin-to-pin contact — the two pins push against each other rather than making a socket-to-pin connection. Similarly, standard SMA female (center hole) on RP-SMA male (center hole) results in hole-to-hole with no center conductor contact at all. This adapter resolves the center conductor incompatibility by providing the appropriate male center connector on each side.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Will this adapter allow me to use a standard SMA antenna on a WiFi router?\u003c\/strong\u003e\n\u003cp\u003eYes, with a clarification about connection direction. Most WiFi routers have RP-SMA female ports (center pin visible in the port). This adapter has RP-SMA male on one end — which plugs into the router's RP-SMA female port — and standard SMA male on the other end. But standard SMA male needs to connect to an SMA female socket (on a cable or adapter), not directly to another SMA male. The typical use case: SMA-male-terminated pigtail cable → this adapter's SMA male end via SMA F-F coupler → adapter's RP-SMA male end → router's RP-SMA female port.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Is there any signal loss from this SMA\/RP-SMA conversion?\u003c\/strong\u003e\n\u003cp\u003eQuality brass adapters introduce approximately 0.1–0.2 dB of insertion loss at 2.4 GHz — negligible for practical WiFi applications. The conversion itself introduces no impedance mismatch since both SMA and RP-SMA are 50 ohm standards with identical electrical geometries (only the center conductor gender is different). Connection quality (proper thread engagement, clean contacts) has a far greater impact on signal integrity than the adapter's inherent insertion loss.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Can this adapter be used for FPV drone antenna connections?\u003c\/strong\u003e\n\u003cp\u003eYes. FPV video transmitters, receivers, and antennas use a mix of standard SMA and RP-SMA connectors depending on manufacturer and application. Long-range FPV systems often use standard SMA; shorter-range systems and many ready-to-fly quads use RP-SMA. This adapter allows cross-connection between the two standards, enabling a standard SMA antenna to be used with an RP-SMA-port VTX or a standard SMA-port VTX to accept an RP-SMA antenna — without the need to change connectors on the antenna or transmitter.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: How do I identify whether my router port is RP-SMA or standard SMA?\u003c\/strong\u003e\n\u003cp\u003eLook into the center of the female antenna port on your router. If you see a small protruding pin in the center, it is RP-SMA female (center pin present). If you see a center hole with no pin, it is standard SMA female (center hole). Most consumer WiFi routers (ASUS, TP-Link, Netgear, Linksys) use RP-SMA female ports with a visible center pin. Ham radio handhelds and RF test equipment typically use standard SMA female with a center hole. This is the fastest way to determine which standard your device uses without consulting documentation.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Why does the pack include 2 adapters?\u003c\/strong\u003e\n\u003cp\u003eWiFi routers and dual-band access points typically have two antenna ports — one for 2.4 GHz and one for 5 GHz (or two MIMO antennas per band). The 2-pack allows both ports to be adapted simultaneously, maintaining a matched antenna configuration on both ports. Using mismatched adapters (one ported with adapter, one without) can create asymmetric antenna performance. A spare is also useful since male-to-male adapters at frequently connected points experience regular mating cycles.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":42380000428067,"sku":"OL0842-2X","price":9.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL0842_1.jpg?v=1777274237"},{"product_id":"50-pieces-mini-pci-ufl-to-sma-bulkhead-jack-adapter-antenna-wifi-pigtail-cable-ipx-to-sma-female-1-13mm-10cm-pigtail-cable","title":"50 Pieces Mini PCI UFL to SMA Bulkhead Jack Adapter Antenna WiFi Pigtail Cable IPX to SMA Female 1.13mm 10CM Pigtail Cable","description":"\u003cdiv class=\"geo-spec-block\"\u003e\u003cpre\u003e\n--- QUICK SPEC REFERENCE ---\nProduct: 50 Pieces Mini PCI U.FL to SMA Bulkhead Jack Pigtail Cable\nSKU: OL-4030-50X\nConnector A: U.FL (IPX \/ MHF1) — Female\nConnector B: SMA Jack (Female, Female Pin)\nCable Type: 1.13mm coaxial\nCable Length: 10cm (custom lengths available on request)\nImpedance: 50 Ohm\nFrequency Range: DC to 6 GHz\nQuantity: 50 pieces per pack\nPrice: $38.89 (bulk pack)\nIn Stock: Yes\nCompatible With: Mini PCI-E wireless cards, laptop WiFi modules, routers with U.FL antenna ports\n---\n\u003c\/pre\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"geo-description\"\u003e\n\u003cp\u003eThis 50-piece bulk pack of U.FL to SMA female pigtail cables is designed for high-volume OEM builds, repair shops, and lab environments that regularly install or replace internal WiFi antenna cables in laptops, mini PCI-E wireless cards, and embedded routers. Each cable connects a U.FL (also called IPX or MHF1) port on the wireless module to an SMA female bulkhead jack, allowing an external antenna to be mounted through a panel or enclosure wall.\u003c\/p\u003e\n\n\u003cp\u003eThe 1.13mm coaxial cable is the correct diameter for U.FL terminations — thinner and more flexible than RG316 or RG174, making it ideal for routing through tight chassis spaces. At 10cm length, these cables suit most standard laptop and mini-ITX builds without excess slack. The SMA female (jack) end accepts any standard SMA male antenna connector. Impedance is 50 ohm throughout, maintaining signal integrity from DC to 6 GHz, which covers 2.4 GHz WiFi, 5 GHz WiFi, and most sub-6 GHz LTE bands.\u003c\/p\u003e\n\n\u003cp\u003eThese cables are designed for Mini PCI-E card U.FL ports. They are NOT compatible with M.2 NGFF cards, which use the smaller MHF4 connector — MHF4 and U.FL are not interchangeable despite looking similar. If you need M.2 NGFF compatibility, order MHF4-to-SMA cables instead. Ships from China, typical delivery 1–2 weeks. Custom lengths available — contact rflinker@onelinkmore.com with your requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"geo-faq\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: What is the difference between U.FL, IPX, and MHF1 — are they all compatible?\u003c\/strong\u003e\n\u003cp\u003eYes, U.FL, IPX, and MHF1 all refer to the same connector standard. These are different brand names for the same 1.13mm micro coaxial connector used on Mini PCI-E wireless cards. This cable is compatible with all three names. However, MHF4 (used on M.2 NGFF cards) is a different, smaller connector and is NOT compatible with U.FL\/IPX\/MHF1.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Will this cable work with my laptop's WiFi card?\u003c\/strong\u003e\n\u003cp\u003eIf your laptop has a Mini PCI-E wireless card (common in laptops made before 2015), the U.FL connector on the card will match this cable. If your laptop has an M.2 NGFF wireless card (most laptops after 2015), you need MHF4-to-SMA cables instead. Check your card's connector size — U.FL is approximately 2mm in diameter, MHF4 is slightly smaller at 1.6mm.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: What frequency range do these pigtail cables support?\u003c\/strong\u003e\n\u003cp\u003eDC to 6 GHz. This covers 2.4 GHz (WiFi 4\/5\/6, Bluetooth), 5 GHz (WiFi 5\/6\/6E lower bands), and sub-6 GHz 4G LTE and 5G NR bands. The 1.13mm cable has low insertion loss at these frequencies, making it suitable for all current WiFi and cellular applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Why buy 50 pieces instead of individual cables?\u003c\/strong\u003e\n\u003cp\u003eThe 50-piece pack is intended for repair shops, system integrators, and OEM manufacturers who install WiFi cards regularly. At $38.89 for 50 pieces ($0.78 per cable), the per-unit cost is significantly lower than buying individual cables. The cables are identical, so excess stock can be stored for future use.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: Can I get a custom cable length?\u003c\/strong\u003e\n\u003cp\u003eYes. The standard pack ships at 10cm, which fits most laptop and mini-ITX enclosures. If you need a different length (such as 15cm, 20cm, or 30cm), contact rflinker@onelinkmore.com with your quantity and length requirements. Custom length orders are available for both bulk and smaller quantities.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"faq-item\"\u003e\n\u003cstrong\u003eQ: The SMA end is female — what antenna connector does it accept?\u003c\/strong\u003e\n\u003cp\u003eThe SMA female jack (with a female pin in the center) accepts a standard SMA male plug (with a male pin). This is the most common SMA configuration for external antennas. Do not confuse this with RP-SMA female, which has a male pin in the center — RP-SMA and standard SMA are not compatible despite the similar appearance.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":42555960000547,"sku":"OL-4030-50X","price":38.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-4030_13_1_e418a671-fdad-43fa-9efc-1f12d57a3205.jpg?v=1781660982"},{"product_id":"fpv-small-wifi-antenna-2-4ghz-wireless-module-omni-directional-thumb-antenna-mmdvm-network-router-antenna-sma-male-tx-rx-mini-rhcp-racing-drone-antenna-for-multicopter-wifi-usb-adapter-pack-of-2","title":"FPV Small WiFi Antenna 2.4GHz Wireless Module Omni Directional Thumb Antenna mmdvm Network Router Antenna SMA Male TX RX Mini RHCP Racing Drone Antenna for Multicopter WiFi USB Adapter Pack of 2","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eThis Mini WiFi Bluetooth antenna could be used on drone transmitter\u0026amp;receiver and PC motherboard;The 2.4GHz small WiFi antenna will assist your network devices get a stronger signal reception and a stable connection, no dropouts when use them.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eCompatibility with wireless standards \u0026amp; applications;Vertically polarized and suitable for many of today’s machine to machine and communication applications such as telemetry, remote monitoring and mesh networking applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eConector Type : SMA Male (pin inside); Antenna gain :2 dBi;impedance matching to 50 Ohm gear;3CM long\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003ePolarization Omnidirectional,Maxlmum input Power:50W;Application:wireless network router, PCI PCIe network card,notebook PC computer external USB adapter, WLAN AP \u0026amp; Hotspot wireless range extender, FPV camera, etc\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003ePackage Content : 2 x 2.4GHz Short WiFi Antenna\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":43184751378467,"sku":"JYA-022-2X","price":9.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/JYA-022_3.jpg?v=1782434159"},{"product_id":"ufl-to-sma-mhf4-to-rp-sma-female-male-pin-rf-pigtail-wifi-antenna-extension-cable-0-81mm-for-pci-wifi-card-wireless-router-m-2-cards-pack-of-300-19-6-inch-50-cm","title":"UFL to SMA MHF4 to RP SMA Female (Male pin) RF Pigtail WiFi Antenna Extension Cable 0.81mm for PCI WiFi Card Wireless Router M.2 Cards Pack of 300 (19.6 inch (50 cm))","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eFit 7260NGW 7265NGW 8260NGW 8265NGW 9260NGW NGFF Wireless Card \u0026amp; M.2 (NGFF) WiFi \/ WLAN \/ 3G \/ 4G \/ LTE Modules Intel Dual Band Wireless-AC, Intel Wireless Gigabit Antenna M10041R,Intel Tri-Band Wireless-AC 17265, 7260 802.11ac WIFI Board\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eufl Cables Have Bulkhead Gold Plated Connector,ufl Terminal Block Connector for mini pci card,U.FL MHF4,Wide application: Mobile phones, Antenna, WLAN, Mini PCI, Bluetooth, PDA, GPS, drone, transmitter, electronic measuring instrument\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eGender: RP SMA Female MHF4;Cable Length: 5cm,10cm,15cm,25cm,50cm;50 ohm pigtail cable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eApplicable cable: 0.81mmRF coaxial cable; Application Technology: IEEE802.12 a\/b\/g\/n, WiMax, Zigbee, Bluetooth Wireless; COMPATIBILITY ALERT: Designed exclusively for M.2 (NGFF) interface cards. Please note: This is the ultra-small Micro RF Gen4 type connector and is NOT compatible with older Mini PCI-E cards.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003ePackage Content : 300 x RP SMA to MHF4 cable (Make sure you are familiar with your connectors before buying, As stated in the listing MHF4 will NOT work for Mini PCIe Wireless Card. They are for NGFF Wireless Card known as MHF4 only.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":43191955193891,"sku":"OL-4016-300X","price":898.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-4016_50_b2a0fe62-96a4-46ef-8144-de472931946d.jpg?v=1782700986"},{"product_id":"fpv-small-wifi-antenna-2-4ghz-wireless-module-omni-directional-thumb-antenna-mmdvm-network-router-antenna-rp-sma-male-tx-rx-mini-rhcp-racing-drone-antenna-for-multicopter-wifi-usb-adapter-pack-of-2-副本","title":"FPV Small WiFi Antenna 2.4GHz Wireless Module Omni Directional Thumb Antenna mmdvm Network Router Antenna RP SMA Male TX RX Mini RHCP Racing Drone Antenna for Multicopter WiFi USB Adapter Pack of 1000","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eThis Mini WiFi Bluetooth antenna could be used on drone transmitter\u0026amp;receiver and PC motherboard;The 2.4GHz small WiFi antenna will assist your network devices get a stronger signal reception and a stable connection, no dropouts when use them\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eCompatibility with wireless standards \u0026amp; applications;Vertically polarized and suitable for many of today’s machine to machine and communication applications such as telemetry, remote monitoring and mesh networking applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eConector Type : RP SMA Male;Antenna gain :2 dBi;impedance matching to 50 Ohm gear;3CM long\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003ePolarization Omnidirectional,Maxlmum input Power:50W;Application:wireless network router, PCI PCIe network card,notebook PC computer external USB adapter, WLAN AP \u0026amp; Hotspot wireless range extender, FPV camera, etc\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003ePackage Content : 1000 x 2.4GHz Short WiFi Antenna\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ONELINKMORE","offers":[{"title":"Default Title","offer_id":43632779034659,"sku":"OL-3464-1000X","price":2175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0289\/7123\/7411\/files\/OL-3464_6.jpg?v=1691401023"}],"url":"https:\/\/onelinkmore.com\/fr\/collections\/fpv-drone-rf.oembed?page=2","provider":"ONELINKMORE","version":"1.0","type":"link"}