ONELINKMORE
2 Pieces Fakra Z Jack PCB Mount Straight 4 Contact Pin Connector for Blue GPS Telematics or Navigation
2 Pieces Fakra Z Jack PCB Mount Straight 4 Contact Pin Connector for Blue GPS Telematics or Navigation
Couldn't load pickup availability
--- QUICK SPEC REFERENCE --- Product: 2 Pieces Fakra Z Jack PCB Mount Straight 4-Pin Connector Blue for GPS Telematics Navigation SKU: OL-4936-2X Price: $9.99 Quantity: 2 pieces per pack Typical Applications: GPS, telematics, navigation systems Availability: In Stock — US warehouse, ships 1-2 business days ---
The 2 Pieces Fakra Z Jack PCB Mount Straight 4-Pin Connector Blue for GPS Telematics Navigation is an RF interface component designed for GPS, telematics, navigation systems.
Built to standard RF connector specifications with quality metal construction.
Ships from US warehouse. Confirm connector type, gender, and cable compatibility before ordering.
Frequently Asked Questions
Fakra uses color-coded housings to indicate application and prevent accidental cross-connections. Common codes: Blue/C = GPS navigation; Waterblue/Z = GPS/SDARS/keyless entry; White/B = AM/FM radio with phantom power; Curry/K = satellite TV/radio; Black/A = general radio without phantom power. Always match color codes when replacing Fakra connectors.
Fakra is the standard automotive RF connector used on European vehicles and many Asian vehicles since the 2000s. North American vehicles more commonly use DIN (Motorola plug) or SMB connectors. Verify your vehicle's existing antenna connector type by looking at the head unit's antenna input before ordering.
Phantom power is a DC voltage (typically 5–12V) supplied through the coaxial center conductor to power active antenna amplifiers. Fakra code B (white) supports phantom power for AM/FM active antennas. Fakra code A (black) does not support phantom power. Connecting a phantom-power antenna to a non-supporting connector will result in weak signal reception from an unpowered amplifier.
Fakra connector ferrule size depends on cable outer diameter. Thin cable versions fit RG174, RG316, LMR100 (approximately 2.8mm OD). Thick cable versions fit RG58, LMR195 (approximately 5mm OD). Using a thick-cable connector on thin cable results in a loose crimp and poor shield contact — verify cable OD before ordering.
Yes. Fakra connectors require two crimps: a hex crimp on the outer ferrule and a crimp on the center contact. A standard coaxial crimp tool with the correct hex die set is required. The required hex size varies by connector model — check the connector datasheet for the specified crimp die dimensions.
Fakra connectors are designed for in-vehicle use (interior, not direct weather exposure). For applications requiring weatherproofing, apply dielectric grease to the mating surfaces and use heat-shrink tubing or self-amalgamating tape over the completed connection. Outdoor Fakra installations should be fully sealed against moisture.
Share
